Mastercarver
Micro Pro
$279.95
MASTERCARVER® MICRO-PROTM Create pro quality detail! Higher carving
speeds give superior carving results, smoother texturing, plus improved
detailing, stoning & feathering. With high torque & speed up to 46,000
rpm, the Micro-ProTM has the power, speed, superior features & quality
you want, priced far less than others! For better control, power flows
to the handpiece by a 6’ flexible cord. The standard dial or optional
foot pedal varies speed from 0 to 46,000 rpm! Control box features: dial
speed control knob, lighted on / off switch, overload protection,
overload warning light, 6-burr storage holes, 110/220 Volt selector,
forward / reverse switch (directs chips away from you & reduces grain
effects). Handpiece features high torque, fan cooled micro motor, sealed
ball bearings, hanging loop, solid grip turn-ring for hands-free bit
changes (1/4 turn releases or locks bits & collets). Handpiece
specifications 46,000 rpm: L. 6”, diameter 5/8”-1”, weight 6.9 oz. Sets
include: handpiece, 3/32” & 1/8” quick change collets, variable speed
power supply, long-life motor brushes, spare fuse, instructions & 1-year
warranty.
Optional Foot Pedal Power Control - $25.00
If your use to running your carving equipment from a foot pedal - you can
use your Micro Grinder or Burner the same way with the optional foot
pedal power control. Simply set the speed or power on the units
control panel and then use the foot pedal to turn on the grinder or the
burner. A handy pedal to have around the shop to use with other
hand held power tools.
If your looking for a ultra high speed detail system this one is
it. I have been using one now for just over a year and love it.
Especially for carving fin and head detail in wood carvings. If
you have a hard time cutting in clean fin rays with a 20,000 rpm machine
wait till you see what a difference an extra 30,000 rpms can do for you.
It is unbelievable how much the extra speed helps in cutting smooth
flowing fin rays. Perfect rays, one right after another with no
fuzzing or tracking problems. A perfect detailing machine, grind
in crisp head and fin detail ~Ed Walicki
MASTERCARVER® MICRO-PROTM Create pro quality detail! Higher carving
speeds give superior carving results, smoother texturing, plus improved
detailing, stoning & feathering. With high torque & speed up to 46,000
rpm, the Micro-ProTM has the power, speed, superior features & quality
you want, priced far less than others! For better control, power flows
to the handpiece by a 6’ flexible cord. The standard dial or optional
foot pedal varies speed from 0 to 46,000 rpm! Control box features: dial
speed control knob, lighted on / off switch, overload protection,
overload warning light, 6-burr storage holes, 110/220 Volt selector,
forward / reverse switch (directs chips away from you & reduces grain
effects). Handpiece features high torque, fan cooled micro motor, sealed
ball bearings, hanging loop, solid grip turn-ring for hands-free bit
changes (1/4 turn releases or locks bits & collets). Handpiece
specifications 46,000 rpm: L. 6”, diameter 5/8”-1”, weight 6.9 oz. Sets
include: handpiece, 3/32” & 1/8” quick change collets, variable speed
power supply, long-life motor brushes, spare fuse, instructions & 1-year
warranty.